keany |
|
| We are pleased to announce...
first in the world ...
unlock of Motorola v1050
as well as long awaited Motorola v975 (ver R245_xxx)
and:
Motorola E378i
tested and proved as supported: C117 (Acer) and V170 (Acer)
and...
New version of SmartMoto!
new features in SmartMoto:
- backup and restore flash for A830, C975, C980, V980, V975, E1000, A1000, V1050, V150 (R313LT_xxx)
- support new boot V3 (8.2.3, 8.2.4) and boot Axxx (6.1.2)
- improved procedure for flashing certain types of flash for C350L
- clear life timer
- master clear
- master reset
- change bands
- unlock initialization for certain phone models (V1050 and V975)
- improve Win XP compatibility option
Attention!
Unlock procedure for V1050 and V975 (ver R245_xxx):
You need to use SmartMoto to unlock these models.
Power on the phone.
Connect it to PC via smart-clip, detect your phone in SmartMoto.
Go to Unlock bookmark, pick your model, press "Start unlock procedure" button.
Phone goes into boot mode, reserve copy of security area is created.
Part of phone Firmware is reflashed.
Phone doesn't power on after that. SmartMoto will give you the message requiring to take phone into boot mode using keys combination: *,#, PWR ON
(at this moment the phone has to be connected by usb cable) or using Repair cable.
Press "OK" button. Wait till the process ends.
The phone powers on and is ready to be unlocked by Smart-Clip using simple "press one button" method (press Unlock button on Smart-Clip).
Please note that if boot loader version of V975 and V1050 is older than 0.6.1.2, you can unlock these phones vis standard p2k unlock procedure
Unlock procedure for E378i:
Power on the phone, connect it to Smart-Clip, press Unlock button.
Phone goes into boot mode.
E/G starts blinking.
Power the phone ON manually within 2-3 seconds after display turns off.
Wait for unlock procedure to complete.
Alternatively you can try to unlock this phone with battery charger on.
NOTE:
1. Please be advised that new SmartMoto requires registration.
This is how it works:
Connect your clip to PC.
Start SmartMoto.
Select Phone Connection: Smart-Clip USB port.
Press Search.
You be will be offered a link, follow it, fill out the form and you will receive the key needed to activate the program.
Copy the key and paste it into a registration window in SmartMoto software. No more registration is needed.
Smart-Clip is allowed to register only once. If user needs to register it again to run SmartMoto elsewhere he needs to contact us.
2. The following option is recommended on Windows 2000/XP to improve communication stability:
Disable OS parallel port polling (requires reboot)
|
| | |
